The controller is an intelligent, multi-purpose solar charge and discharge controller. It features a fixed LCD display with a very user-friendly interface and various control parameters can be set flexibly to meet your application requirements.
Multi-angle display of the controller, display of the main board inside the controller
Operation demo:
1.The positive and negative poles of the battery and solar panel must be accurately connected to the positive and negative poles of the controller. At the same time, it should be noted that the positive and negative poles of the battery cannot be connected together to avoid damage to the battery due to the formation of a loop.
2.First short press MENU to switch to the float charging interface. Press and hold MENU to set the float voltage.
3.Press and hold MENU to enter the under voltage recovery voltage setting.
4.Press and hold MENU to enter the under voltage setting
5.Setting the load mode
6.Setting the battery type
10A/20A：
yonghuisolar.com/products/y-h-10a-20a-pwm-solar-charge-controller-12v-24v-auto-lcd-display-battery-intelligent-regulator-for-lead-acid-lithium?variant=42523727397020
30A/40A/60A:
yonghuisolar.com/products/y-h-30a-40a-60a-pwm-solar-charge-controller-max-pv-50v-12v-24v-auto-lcd-display-battery-intelligent-regulator-for-solar-panel?variant=42523728609436
60A/80A/100A：
yonghuisolar.com/products/y-h-60a-80a-100a-pwm-solar-charge-controller-max-pv-100v-12v-24v-48v-auto-lcd-display-battery-intelligent-regulator-for-solar-panel?variant=42523743191196
- Y&H PWM FT Series Solar Charge Controller Operation Demonstration ( Download)
- Y&H Solar Charge Controller SY Series MPPT 60A/80A/100A Operation Demonstration ( Download)
- Y&H MPPT 40A/60A Solar Charge Controller，for FLD GEL SLD LI User Battery ( Download)
- Y&H Smart Solar Charge Controller Mode Setting and WiFi Connection Demonstration ( Download)
- 60 Amp and 50 Amp PWM solar controller setting. ( Download)
